----------------------------------------------------------------------
Level 500 : => Channel Manager
SET :
syntax - /msg X,W set #channel <variable> <value> :
Changes special X/W modes for channel.
See more settings in the level 450.
Variables for SET :
FloodPro :
The maximum number of KICKs, TOPIC CHANGES and such that can be sent to
the channel in a 15 second
period. Any user exceeding this limit will be
kicked and suspended (if on the userlist). NOTE : This
does NOT work
against normal channel dialogue, since X/W are +d (deaf) to all channel
text.
NoOp :
In this mode X/W will deop EVERYONE. Making them the only op
in the
channel. However, users may still access commands though X/W.
OpOnly :
Make op the only chanop command available though X/W. Also, you can ONLY
op yourself. NOTE : This does NOT prevent someone with ops in the
channel from exercising op commands
themselves.
StrictOp :
In this mode only people on the userlist with access
equal or greater than
100 may have ops. If they are on the list, they must send their password
before they are allowed ops.
Lang :
Changes default
language for the channel. The supported languages are:
en (english)
nl (dutch)
fr (francais)
ge (deutsch)
----------------------------------------------------------------------
Level 450 => Trusted channel admin.
SET : syntax - /msg X,W set #channel <variable>
<value> :
Changes special X/W modes for channel.
See more settings in the level 500.
Variables for SET :
AlwaysOp :
This variable
insures that X/W will always have ops. They will op
themselves if needed.
UserFlags :
Set's
default user settings that will be given to a new user on the
channel. Default value is 0
0 = AUTOOP OFF for new users
1 = AUTOOP ON for new users
MassDeopPro
:
The maximum number of deops X will allow in a 15 sec period. Any user
exceeding
this will be DeOped and Suspended (if on the userlist).
NickFloodPro :
The
maximum number of nick changes that can be done in the channel
in a 15 sec period. Any user exceeding
this number will be kicked from
the channel and suspended (if on the userlist). NOTE : this variable
is now obsolete, since the Undernet server will not allow rapid nick
changes.
Description :
Sets the default channel topic. This is used to set the autotopic is
ON.
This does NOT affect the actual channel topic if autotopic is off. The
topic
can also be seen in the chaninfo or the webpage.
Example:
/msg X set #channel
description The UnderNet Chat Channel.
URL :
Sets the default channel URL.
This can be seen from the chaninfo, or the
webpage. It is also used to set the topic if autotopic is
ON.
Example:
/msg X set #channel URL http://cservice.undernet.org
AutoTopic :
This flag
makes X or W reset the topic to the channel URL and
Descrition every 30 minutes. Note that if the channel
is idle, the
topic will not be reset during that time.
Example:
/msg X set #channel AutoTopic ON
Addchan :
syntax - /msg X,W addchan <#channel> :
Adds the channel to X/W's database and sets channel default modes. If
you do not use this command after you
join X/W to your channel they will
not rejoin after a restart.
Join :
syntax
- /msg X,W join <#channel> :
Tells X/W to join your channel. Important: see Addchan
Part :
syntax - /msg X,W part <#channel> :
Tells X/W to part your channel.
Remchan :
syntax - /msg X,W remchan <#channel> :
Removes your channel defaults from X/W's
database. Useful when you want
to change default modes. This is NOT the same as a purge of your
channel. X/W will not rejoin unless you send addchan again after this.
----------------------------------------------------------------------
Level 400 => Userlist Admin
Adduser :
syntax -
/msg X@channels.undernet.org adduser #channel <nick> [user@host] <level> <password>
or
/msg W@channels2.undernet.org adduser #channel <nick> [user@host] <level> <password>
Adds a user to your channel's database with the given access level and
password. The password
field is mandatory. If the person is online
user@host can be left out, (X/W will look it up themselves). You can
only
add people with access lower than yours.
Clearmode :
syntax - /msg X,W clearmode
<#channel> :
Clears all channel modes. Remember that if your channel has been
locked
up (set +i or +k without your knowledge) the best option is
to use invite and status, because a take over
bot can reset the
modes if you use clearmode.
Modinfo :
syntax - /msg X,W modinfo
<#channel> <variable> <user> <newvalue>:
Changes a user's access settings
Variables for Modinfo :
ACCESS : Changes the access level of a user, possible values are 1 to
(1 level below yours). So if you are 400, you can give up to
399 access.
AUTOOP : Changes autoop from ON to OFF. Autoop means that X/W will op
the user when they enter the channel.
MATCH : Changes the user@host for a user in X/W's database. Useful
if a user on your channel has changed ISP's
Example : /msg
X modinfo #somechannel MATCH someuser blah@blah
PASSWORD : Changes
a users password. Remember that the command to
change your own password is newpass (level 0 command).
Remuser :
syntax - /msg X,W remuser
<#channel> <nick> :
Removes a user from the channel database. You must have higher access
than the user you want to remove.
Status :
syntax - /msg X,W status <#channel> :
Displays all special X/W modes, Channel modes and the number of users
in your channel. Very useful to check
channel keys :)
----------------------------------------------------------------------
Level 200 => Senior channel operator
Mask kick:
syntax - /msg
X,W kick <#channel> *!*username@*.mask [reason]
Kicks everyone using this
mask. The reason is optional.
Your name will be placed in the kick msg.
----------------------------------------------------------------------
Level 100 => Channel operator
Deop :
syntax - /msg X,W deop <#channel> <nick1> [nick2] [nick3] .... :
Deops one or
more persons in you channel.
Invite :
syntax - /msg X,W invite <#channel> <nick>
:
Has X invite someone in your channel. You can't use this command to mass
invite but it's
very useful if your channel is +i (invite only). Note
also that a invite override the channel modes +l (channel
limit) and
+b (ban). But X,W will ever kick someone in its ban list even if invited.
Op :
syntax - /msg X,W op <#channel> <nick1> [nick2] [nick3] .... :
Ops one or more
persons in your channel
Suspend :
syntax - /msg X,W suspend <#channel> <nick|user@host> <duration> <s,m,h or d> :
Suspends a users access to X/W for the specified period of time.
s(econds) , m(inutes), h(ours) or d(ays).
You can only suspend someone
with access lower than yours.
Example:
/msg X suspend #my_channel Op_nick 3 d
Unsuspend :
syntax - /msg X,W unsuspend <#channel>
<nick> :
Unsuspends a user on your access list.
----------------------------------------------------------------------
Level 75 => New channel operator
Ban :
syntax - /msg X,W ban <#channel> <nick|user@host> [duration in hours] [level] [reason] :
Bans a person on X/W's list for a specific number of hours. The max is
336, 2 weeks. You use the person's
nick if they are online. or specify
a user@host if they are not. Level can be from 1 to your access level.
A level 20 - 74 ban prevents the user from having ops. 75+ keeps them
from being in the channel at all. You
must at least have the same
access level as the level of the ban to remove it.
Unban :
syntax - /msg X,W unban <#channel> <nick|user@host> :
Unbans a person from your channel.
By nick if they are online, or by
user@host if they are not, as with ban. Also, removes any matching
bans on X/W's banlist, so if you are banned and don't know the mask
banned just use your nick to unban any
mask matching yours.
----------------------------------------------------------------------
Level 50 => Channel regular
Kick :
syntax - /msg X,W kick <#channel> <nick> [reason] :
Tells X/W to kick somone
from your channel, The reason is optional.
Your name will be placed in the kick msg.
Topic :
syntax - /msg X,W topic <#channel> <newtopic> :
Changes the topic in your channel.
----------------------------------------------------------------------
Level 1 => *shrug*
Status:
syntax - /msg X,W status <#channel> :
This does the same thing as level 400 status EXCEPT it will
not
report channel modes (+nt ect) to anyone with access below 400.
----------------------------------------------------------------------
Level 0 => Everyone else
Access :
syntax - /msg X,W access <#channel> <nick|search string> [options] :
Can look
up the access for a certain person or a string. Expl : /msg X,W
access #channel *!*@*.gnn.com , would return all GNN users with access
on that channel. Also you can use these options instead of a nick or
string. If the list has more than 15
entries check the Channel Service
web site.
Access options
-min level - show only users above the given level
-max level - show only users below the given
level
-autoop - Show only users with autoop on.
-noautoop - Show only
users with autoop off.
-modif - Shows who last modified the access listing
End of Access options
Access Flags : - output of access
command
-X- USER: Blahguy- (*!*username@*.blah.com) ACCESS: 1 LMPU
-X- CHANNEL:
#cservice -- AUTOOP: ON
M = Modified, but not saved to disk, database is autosaved
every
90 minutes.
P = Has a password
U = User is currently authenticated
L = Loaded in memory, An access remains listed in memory
for 90
minutes after you log off.
Banlist :
syntax - /msg X,W banlist <#channel>
:
Shows the channel banlist. You must be in the channel to use this
command.
Chaninfo :
syntax - /msg X,W chaninfo <#channel> :
Displays whether or not a channel is registered,
to whom, and
if set, channel description and URL.
Deauth :
syntax - /msg X,W
deauth <#channel> :
If you have sent you password already and would like to
deauthenticate
yourself. Use this command.
Help :
syntax - /msg X,W help [command] :
Displays
help file on a given command.
Lbanlist :
syntax - /msg X,W lbanlist <#channel> <search
string> :
Searches X/W's banlist for a certain string. You need to be in the
channel to
use this command. Use * to see the whole list. If the list
has more than 15 entries check the Channel Service
web site.
Login :
syntax -
/msg x@channels.undernet.org login <#channel> <password> - for X
/msg w@channels2.undernet.org login <#channel> <password> - for W
This loads your access listing into memory and authenticates you on
your channel.
Note :
Exact same as pass
Pass :
syntax - /msg <X@channels.undernet.org|W@channels2.undernet.org> pass <#channel> <password>
See Login
Showcommands :
syntax - /msg X,W showcommands [#channel] :
Shows
all commands you can use on a channel.
Showignore :
syntax - /msg X,W showignore :
Shows X/W's ignore list. This is what happens when someone tries to or
accidentally floods X/W. The time
length is 60 minutes.
Verify :
syntax - /msg X,W verify <nick> :
Displays
whether or not a person is an official cservice rep. If X/W
answers that the person is "NOT an authenticated
CSERVICE
representative" please come to #cservice and ask about them.
------------------------------------------------------------------------------
